OpenPrinting
Printers
Kyocera
FS-5900C
Miscellaneous
Printer supports PJL.
Printer supports direct text printing with the 'us-ascii' charset.
Comments
Use the Kyocera PPD file for PostScript (Instructions)
1200dpi in PostScript mode
600dpi with PCL5e monochrome drivers ljet4 and ljet4d for PCL5e
and duplex
300dpi with PCL 5c color driver cljet5 (note the driver
information).
48 MB RAM, upgradeable to 112 MB
Emulations:
PostScript II (KPDL2) with Automatic Emulation Sensing
HP Color LaserJet 5 (PCL5c, PJL), Prescribe II
All common Barcode-Fonts (including 2D Barcodes) in
ROM
Reprogrammable EEPROM
A network-interface like SB-110 (100Mb/s, supported protocols:
TCP/IP, AppleTalk, Novell) is highly recommended, the
parallel-port is too slow for such amounts of data (printing a
full-color 1200x1200dpi DIN A4 page transfers up to 52 MB of
data).
Maximum paper width: 8.5 inches / 21.6 cm
(Standard format printer)
Printing engine speed: 4 pages/min
Drivers
The following driver(s) are known to drive this printer:
Recommended driver:
|
|
Manufacturer-supplied PPD files for Kyocera's PostScript printers
Supplier: Kyocera (this printer's manufacturer)
License: MIT (free software, show license text)
| |
| Color output Type: PostScript | |
| Text: | |||||||||| 100 | Graphics: | |||||||||| 100 | System Load: | Unknown | |
| Line Art: | |||||||||| 100 | Photo: | |||||||||| 100 | Speed: | Unknown | |
| Download: | PPD file: View PPD, directly download PPD
| |
| | |
Other drivers:
|
|
Top Quality Printer Drivers for inkjets, dye sublimation printers,
and PCL lasers
Supplier: Gutenprint project
License: GPL (free software)
| |
| User support: | Gutenprint mailing list at SourceForge (voluntary)
| |
| Color output Type: CUPS Raster | |
| Text: | |||||||||| 90 | Graphics: | |||||||||| 100 | System Load: | Unknown | |
| Line Art: | |||||||||| 90 | Photo: | |||||||||| 100 | Speed: | |||||||||| 60 | |
| | |
|
|
HP's HPIJS driver - PPDs for compatible PCL-5c-based non-HP color laser printers
Supplier: Hewlett-Packard
License: BSD (free software)
| |
| User support: | HPLIP support and bug tracking system (voluntary)
| |
| Max. rendering resolution: 600x600dpi Color output Type: IJS | |
| Text: | |||||||||| 100 | Graphics: | |||||||||| 100 | System Load: | Unknown | |
| Line Art: | |||||||||| 100 | Photo: | |||||||||| 100 | Speed: | |||||||||| 70 | |
| Download: | PPD file: View PPD, directly download PPD
| |
| | |
|
|
Built-in Ghostscript driver for PCL 5e laser printers
Supplier: GPL Ghostscript
License: GPL (free software)
| |
| User support: | OpenPrinting forums (voluntary)
| |
| Max. rendering resolution: 600x600dpi Only monochrome output Type: Ghostscript built-in | |
| Text: | |||||||||| 90 | Graphics: | |||||||||| 60 | System Load: | Unknown | |
| Line Art: | |||||||||| 90 | Photo: | |||||||||| 30 | Speed: | |||||||||| 90 | |
| Download: | PPD file: View PPD, directly download PPD
| |
| | |
|
| This driver is free software.
| |
| Type: Ghostscript built-in | |
| | |
