OpenPrinting
Printers
Kyocera
FS-3750
Miscellaneous
Printer supports PJL.
Printer supports direct text printing with the 'us-ascii' charset.
Comments
Optionally available: 10MBit or 100MBit Network-Module with 32MB RAM
Works fine with linux
Use the
Kyocera PPD file
for PostScript,
Instructions
Use ljet4 for PCL5e but PCL5e is limited to 600dpi
In case of duplex option use ljet4d for PCL5e and duplex
Using pxlmono (PCL6) may be the fastest way to get good printouts.
Maximum paper width: 8.5 inches / 21.6 cm
(Standard format printer)
Printing engine speed: 18 pages/min
Consumables/Refills: just toner, cheap
Drivers
The following driver(s) are known to drive this printer:
Recommended driver:
|
|
Manufacturer-supplied PPD files for Kyocera's PostScript printers
Supplier: Kyocera (this printer's manufacturer)
License: MIT (free software, show license text)
| |
| Color output Type: PostScript | |
| Text: | |||||||||| 100 | Graphics: | |||||||||| 100 | System Load: | Unknown | |
| Line Art: | |||||||||| 100 | Photo: | |||||||||| 100 | Speed: | Unknown | |
| Download: | PPD file: View PPD, directly download PPD
| |
| | |
Other drivers:
|
| This driver is obsolete. Recommended replacement driver: gutenprint | |
| This driver is free software.
| |
| Type: CUPS Raster | |
| | |
|
|
Top Quality Printer Drivers for inkjets, dye sublimation printers,
and PCL lasers
Supplier: Gutenprint project
License: GPL (free software)
| |
| User support: | Gutenprint mailing list at SourceForge (voluntary)
| |
| Color output Type: CUPS Raster | |
| Text: | |||||||||| 90 | Graphics: | |||||||||| 100 | System Load: | Unknown | |
| Line Art: | |||||||||| 90 | Photo: | |||||||||| 100 | Speed: | |||||||||| 60 | |
| | |
|
|
HP's HPIJS driver - PPDs for compatible PCL-5e-based non-HP laser printers
Supplier: Hewlett-Packard
License: BSD (free software)
| |
| User support: | HPLIP support and bug tracking system (voluntary)
| |
| Max. rendering resolution: 600x600dpi Only monochrome output Type: IJS | |
| Text: | |||||||||| 100 | Graphics: | |||||||||| 100 | System Load: | Unknown | |
| Line Art: | |||||||||| 100 | Photo: | |||||||||| 100 | Speed: | |||||||||| 70 | |
| Download: | PPD file: View PPD, directly download PPD
| |
| | |
|
|
Built-in Ghostscript driver for PCL 5e laser printers
Supplier: GPL Ghostscript
License: GPL (free software)
| |
| User support: | OpenPrinting forums (voluntary)
| |
| Max. rendering resolution: 600x600dpi Only monochrome output Type: Ghostscript built-in | |
| Text: | |||||||||| 90 | Graphics: | |||||||||| 60 | System Load: | Unknown | |
| Line Art: | |||||||||| 90 | Photo: | |||||||||| 30 | Speed: | |||||||||| 90 | |
| Download: | PPD file: View PPD, directly download PPD
| |
| | |
|
| This driver is free software.
| |
| Type: Ghostscript built-in | |
| | |
