OpenPrinting database - Printer: Samsung ML-1630
Home : Database : Printers : Samsung : ML-1630| Samsung ML-1630 | |
| See drivers at the bottom of this page. Generic instructions for: CUPS, LPD, LPRng, PPR, PDQ, no spooler |
The properties of this printer are not yet entered into the database
This printer is only listed here because it is in the list of supported printers of the entries for the drivers shown below. This entry can be edited by everyone.
Edit this printer
Discussion forum
Look for help in our forum for printers from Samsung.
Drivers
The following driver(s) are known to drive this printer:
| ||||||||
| Driver for Samsung SPL2 (ML-1710, ...) and SPLc (CLP-500, ...) laser printers Supplier: SpliX project License: GPL (free software, show license text) This driver contains algorithms which are (possibly) patented (See license text). | ||||||||
| User support: | SpliX forum at SourceForge (voluntary) | |||||||
| Max. rendering resolution: 1200x1200dpi Only monochrome output Type: CUPS Raster | ||||||||
| Text: Line art: | |||||||||||||||||||| 100 |||||||||||||||||||| 100 | Graphics: Photo: | |||||||||||||||||||| 100 |||||||||||||||||||| 80 | System load: Speed: | Unknown Unknown | |||
| Download: | Driver packages: x86 32 bit (RPM for LSB 3.2), x86 32 bit (DEB for LSB 3.2), x86 32 bit (RPM for LSB 3.1), x86 32 bit (DEB for LSB 3.1), x86 64 bit (RPM for LSB 3.2), x86 64 bit (DEB for LSB 3.2), x86 64 bit (RPM for LSB 3.1), x86 64 bit (DEB for LSB 3.1) (How to install) | |||||||