| |||||||||||||||
| Black & White laser printer, max. 1200x1200 dpi, works Mostly |  | ||||||||||||||
| Recommended Driver: pxlmono (Home page, View PPD, directly download PPD) | |||||||||||||||
| Generic Instructions: CUPS, LPD, LPRng, PPR, PDQ, no spooler | |||||||||||||||
Discussion forum
Look for help in our forum for printers from Samsung.
Comments
User report:
Sample of APS-Filter printcap file (ESP Ghostscript must be installed, as it provides the "gdi"/"samsunggdi" driver):
# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
lp|samsunggdi;r=600x600;q=medium;c=gray;p=a4;m=auto:\
:lp=/dev/usb/lp0:\
:if=/etc/apsfilter/basedir/bin/apsfilter:\
:sd=/var/spool/lpd/lp:\
:lf=/var/spool/lpd/lp/log:\
:af=/var/spool/lpd/lp/acct:\
:mx#0:\
:sh:
# APS1_END - don't delete this
Sample of SETUP.cfg file from apsfilter:
PRINTER='samsunggdi' RESOLUTION='600x600' COLOR='gray' PAPER='a4' METHOD='auto' QUALITY='medium' INTERFACE='parallel' DEVICE='/dev/usb/lp0' BAUDRATE='' HANDSHAKE='' WORDLENGTH='' PARITY='' STARTBITS='' STOPBITS='' SMB_SERVER='' SMB_IP='' SMB_PRINTER='' SMB_WORKGROUP='' SMB_USER='' SMB_PASSWD='' NCP_SERVER='' NCP_PRINTER='' NCP_USER='' NCP_PASSWD='' rm='' rp=''Main hack is to manualy seting PRINTER='samsunggdi' default not exist in menu from SETUP script of apsfiler.And rerun setup script to create printcap file.
blog comments powered by Disqus
Drivers
The following driver(s) are known to drive this printer:
Recommended driver:
| ||||||||||||||||
| The Foomatic/pxlmono driver works with this printer. This driver is free software. | ||||||||||||||||
| Type: Ghostscript built-in | ||||||||||||||||
| Download: | PPD file: View PPD, directly download PPD | |||||||||||||||
Other drivers:
| ||||||||||||||||
| This driver is free software. | ||||||||||||||||
| Type: Ghostscript built-in | ||||||||||||||||
| Download: | PPD file: View PPD, directly download PPD | |||||||||||||||
| ||||||||||||||||
|
Top Quality Printer Drivers for inkjets, dye sublimation printers,
and PCL lasers
Supplier: Gutenprint project License: GPL (free software) | ||||||||||||||||
| User support: | Gutenprint mailing list at SourceForge (voluntary) | |||||||||||||||
| Color output Type: CUPS Raster | ||||||||||||||||
| Text: | |||||||||| 90 | Graphics: | |||||||||| 100 | System Load: | Unknown | |||||||||||
| Line Art: | |||||||||| 90 | Photo: | |||||||||| 100 | Speed: | |||||||||| 60 | |||||||||||
| Download: | Driver packages: x86 32 bit: 5.0.1 (RPM for LSB 3.1), 5.0.1 (DEB for LSB 3.1), 5.2.7 (RPM for LSB 3.2), 5.2.7 (DEB for LSB 3.2), x86 64 bit: 5.0.1 (RPM for LSB 3.1), 5.0.1 (DEB for LSB 3.1), 5.2.7 (RPM for LSB 3.2), 5.2.7 (DEB for LSB 3.2) (How to install) | |||||||||||||||
| ||||||||||||||||
|
Built-in Ghostscript driver for PCL 5e laser printers
The Foomatic/ljet4 driver works with this printer. One can use the PPD File for the ML-2552W. Only 600 dpi is supported and the lighter printing tones are not visible. Supplier: GPL Ghostscript License: GPL (free software) | ||||||||||||||||
| User support: | OpenPrinting forums (voluntary) | |||||||||||||||
| Max. rendering resolution: 600x600dpi Only monochrome output Type: Ghostscript built-in | ||||||||||||||||
| Text: | |||||||||| 90 | Graphics: | |||||||||| 60 | System Load: | Unknown | |||||||||||
| Line Art: | |||||||||| 90 | Photo: | |||||||||| 30 | Speed: | |||||||||| 90 | |||||||||||
| Download: | PPD file: View PPD, directly download PPD | |||||||||||||||
| ||||||||||||||||
| The Foomatic/ljet4d driver works with this printer. One can use the PPD File for the ML-2552W. Only 600 dpi is supported and the lighter printing tones are not visible. This driver is free software. | ||||||||||||||||
| Type: Ghostscript built-in | ||||||||||||||||
| Download: | PPD file: View PPD, directly download PPD | |||||||||||||||
| ||||||||||||||||
| This printer has a DIMM expansion slot which can take a POSTSCRIPT 3 Emulator ROM. The ROM can be purchased online relatively cheaply (~65 Euro 18.08.2006). Its part number is ML-00PD. An example source www.csv.de. Once the module is installed the postscript drivers can be used.
The printer's memory can also be upgraded up to 144MB. This is also a DIMM module. The Samsung branded memory is rather expensive (500+ euro), a generic memory does the same job with out trouble. A 128MB generic memory module can be found for around ~65 Euro (10.04.2006) from for example best-electronics on ebay.de | ||||||||||||||||
| Type: PostScript | ||||||||||||||||
| Download: | PPD file: View PPD, directly download PPD | |||||||||||||||
| ||||||||||||||||
|
Driver for Samsung SPL2 (ML-1710, ...) and SPLc (CLP-500, ...) laser
printers
Supplier: SpliX project License: GPL (free software, show license text) This driver contains algorithms which are (possibly) patented (See license text). | ||||||||||||||||
| User support: | SpliX forum at SourceForge (voluntary) | |||||||||||||||
| Max. rendering resolution: 1200x1200dpi Only monochrome output Type: CUPS Raster | ||||||||||||||||
| Text: | |||||||||| 100 | Graphics: | |||||||||| 100 | System Load: | Unknown | |||||||||||
| Line Art: | |||||||||| 100 | Photo: | |||||||||| 80 | Speed: | Unknown | |||||||||||
| Download: | Driver packages: x86 32 bit: 2.0.0 (RPM for LSB 3.2), 2.0.0 (DEB for LSB 3.2), 1.0.1 (RPM for LSB 3.1), 1.0.1 (DEB for LSB 3.1), x86 64 bit: 2.0.0 (RPM for LSB 3.2), 2.0.0 (DEB for LSB 3.2), 1.0.1 (RPM for LSB 3.1), 1.0.1 (DEB for LSB 3.1) (How to install) | |||||||||||||||
